Daewoo DHR-9105P Manuel d'utilisateur télécharger pdf (Page 60)

EDITING REFERENCE

59

Check the following guide for the possible cause of a problem before contacting customer support.

Symptom Cause Solution

Troubleshooting

Troubleshooting

Plug the power cord into the wall outlet

securely.

Select the appropriate video input on the

TV so the picture from the HDD/DVD

Recorder appears on the TV screen.

Connect the video cable securely.

Turn on the TV.

Select the correct input mode on the audio

receiver so you can listen to the sound

from the HDD/DVD Recorder.

Connect the audio cables securely.

Turn on the equipment connected with the

audio cable.

Replace with new ones.

Clean the disc.

Insert a disc. (Check that the disc

indicator on the front panel display is lit.)

Insert a playable disc. (Check the disc

type, colour system, and regional code.)

Place the disc with the playback side

down.

Place the disc on the disc tray correctly

inside the guide.

Clean the disc.

Cancel the Parental Control function or

change the rating level.

You cannot connect via the HDD/DVD

Recorder. Connect the component

directly to your TV.

Use the ‘Adjust Channels’ feature to

restore channels.

Tighten connections or replace cable.

Try all ‘Auto Set‘ options; see page 21 for

details.

Turn camcorder on and operate properly.

Use [INPUT] to select AV input channel

(AV, AVF or DV).

Finalise the disc; see page 55.

No solution.

No solution.

The power cord is disconnected.

The TV is not set to receive HDD/DVD

Recorder signal output.

The video cable is not connected

securely.

The TV power is turned off.

The equipment connected with the

audio cable is not set to receive

HDD/DVD Recorder signal output.

The audio cables are not connected

securely.

The power on the equipment

connected with the audio cable is

turned off.

The audio cables are damaged.

The disc is dirty.

No disc is inserted.

An unplayable disc is inserted.

The disc is placed upside down.

The disc is not placed within the

guide.

The disc is dirty.

The Parental Control level is set.

The video signal from the external

component is copy-protected.

The skipped channels were deleted

with the ‘Adjust Channels’ feature.

Antenna or cables are loose.

Wrong Tuning Band is selected in the

HDD/DVD Recorder Setup menu.

Camcorder is off.

The HDD/DVD Recorder’s source is

not set to AV, AVF or DV.

The disc was not finalised (or not made

compatible if using a DVD+RW).

Some players will not play even a

finalised disc.

Discs recorded with copy-once

material cannot be played on other

players.

No power.

No picture.

No sound.

Playback picture is poor.

HDD/DVD Recorder does

not start playback.

Picture from external

input is distorted.

Some channels are skipped

over when using [PR+/–].

Picture or sound of

broadcasting channel is

weak or missing.

Camcorder image not

shown.

Camcorder image via A/V

input to HDD/DVD

Recorder is not shown on

TV screen.

Can’t play disc recorded

on this HDD/DVD

Recorder on another DVD

player.

DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 59 mac001 1200DPI 100LPI

Downloaded from www.Manualslib.com manuals search engine

Downloaded From Disc-Player.com Daewoo Manuals

1 2 ... 55 56 57 58 59 60 61 62 63 64

Commentaires sur ces manuels

Pas de commentaire