Daewoo RFS-26D1 Series Guide d'installation télécharger pdf (Page 38)

1) Unscrew (1 points) to remove Front PCB.

2) Pull out 2 connector (8pin & 2pin) from Front PCB Ass’y. (Do not hold only wires to pull out.)

3) Unscrew (5 points) to remove Front PCB.

* Follow the reverse order when assembling.

※ How to disassemble Front PCB Ass’y

Start

Power input to

Main PCB is ok?

Main PCB Fuse is

disconnected?

Voltage

(DC12V/15.5V/5V) on

Main PCB is OK?

Wire connection

of Front PCB is OK?

Check power connection

from machine compartment

to CN1 of Main PCB.

Change Front PCB AS.

Change Main PCB

Change the fuse

(AC250V 4A)

(on the Main PCB)

Checkup and connect

Front PCB wires.

8-1. Faulty Start (F/R lights OFF , F-PCB Power OFF)

8. TROUBLE DIAGNOSIS

1) 2) 3)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 66 67

Pas de commentaire

Daewoo RFS-26D1 Series Guide d'installation Page 38